Filter
Top Products
30 Basic Operations
Multiple Controller w/Multiple Broadcast Systems Channel Setting
Typically all multiple controller systems will use Broadcast Group 1 Channel 1 for the first
controller in Broadcast Group 1 and Broadcast Group 2 Channel 1 for the first controller in
Broadcast Group 2. All other consoles in each group are added sequentially, using channels
2-4.
LCD Display Action
The LCD will toggle
these screens
The bottom line shows
default settings.
RADIO SETTINGS
BCAST Y CHAN XX
Enter to accept
clear to modify
bcast group 1
Radio Chan 01
The LCD shows the current radio settings along
with a prompt to accept or modify these values.
If the radio settings are correct press <ENTER>.
If these values are incorrect press <CLEAR>.
If <CLEAR> is pressed to modify the radio settings
the LCD at the left is shown, allowing edit of the
channel or broadcast group setting.
Edit the broadcast setting. Use the number keys to
enter the desired broadcast group and press
<ENTER> to accept.
The asterisk will move to the channel setting. Use
the number keys to edit this value and press
<ENTER> to accept. Edit the channel number to
the desired value and press <ENTER> to accept.
(Continued on next page)