Daktronics All Sport 5000 Fitness Electronics User Manual


 
Baseball Operations 47
Section 4: Baseball Operations
Sport Insert: LL-2438
The Sport Insert drawing is located at the end of this section. The Team Name insert and Block
Diagram drawings are located in Appendix A. The Quick Reference is located in Appendix D.
Reference Drawings:
Insert, Baseball ...................................................................................................Drawing A-125061
Insert, Team Name .............................................................................................Drawing A-125290
Block Diagrams, A/S5000/3000, Outdoor Sports ...............................................Drawing A-124690
Refer to the information in Section 2 to start up the console and how to use the sport insert. Read
Section 2 carefully to fully understand the following operation instructions.
If an insert is lost or damaged, a copy of the insert drawings are located at the end of this Appendix
B, which can be used until a replacement can be ordered.
Use the labels provided in Appendix B to attach the correct code number label to the sport insert in
the appropriate location. Write the code number in the space provided below.
Write the correct code number here.
If you do not know the code number to enter for your scoreboard, refer to Appendix B in this
manual. If you do not know the model number of your scoreboard, refer to the Installation and
Maintenance manual provided with the scoreboard.
4.1 Baseball Keys
Inning +1
Note: If game stats are being received from DSTI the keys on the console will be disabled.
The LCD will display the messages shown below when these keys are pressed.
LCD Display Action
STATS RECEIVED
Key disabled
EXIT STATS MODE
Y/N?
The key disabled message will display for one second
and then the <EXIT STATS> message will display and
wait for a <YES> or <NO> key. If the <YES> key is
pressed the stats data will be saved in the console and
the console will <EXIT STATS> mode until another
stats packet is received. This will allow the operator to
enter player stats from the console if the DSTI feed is
lost.