Filter
Top Products
234 Event Counter
Value/Days
Use the <SET MAIN CLOCK> key to set the Time in addition to the number of days to be
counted.
Press <START> to start the main clock. If the console is set to count down, the time value
decrements to 00:00.00 and the day value decrements by one. This continues until 0 days and
00:00.00 time occurs. The console then begins counting up and counts the days and time that
have elapsed since the event occurred.
Note: If the console is set to stop at zero, the clock will not begin counting up until the
<START> key is pressed.
LCD Display Action
DAYS
nnn
nnn = current value
Enter the number of days for countdown (0 – 999).
15.3 Time Base Counter
LCD Display Action
VALUE = nnnnnnn
NXT INC HH:MM:SS
nnnnnnn = current value
The current value is shown on the top line of the
LCD. The time remaining until the next increment
(or decrement.) is shown on the bottom line.
Value/Days
LCD Display Action
VALUE
nnnnnnnn
nnnnnnn = current value
Press <VALUE/DAYS> to begin counting from the
entered initial value. The value can be up to eight
digits.