Filter
Top Products
310 Water Polo Operations
Switch Output
The All Sport 5000 series console has a switch that can be used to drive a number of different
devices. The switch can be configured to operate under different settings. The default setting
is 1-CLOCK= 0.
To display the switch setting that you want to select:
Press the number (0,1,2,3) key as a shortcut or use the left and right arrow keys to scroll
to the desired setting.
Press <YES> to select the new setting.
Press <NO> or the down arrow key to leave the switch setting and display the next
prompt.
The possible settings for the switch output are as follows:
Setting Result
0-DISABLED
SWITCH OUTPUT=n
0-DISABLED?
n = current setting
The switch remains open at all times and any
external devices are disabled.
1-CLOCK = 0
SWITCH OUTPUT=n
1-CLOCK =0?
n = current setting
In count down mode, the switch closes when the
main clock reaches zero and remains closed until a
nonzero value is entered.
In count up mode, the switch closes when the main
clock reaches the proper period, break, or overtime
length and opens when any other value is entered.
2-CLOCK STOP
SWITCH OUTPUT=n
2-CLOCK STOP?
n = current setting
The switch closes when the main clock is stopped
and opens when the main clock is running. External
devices are disabled when the main clock is running.
3-MAIN HORN
SWITCH OUTPUT=n
3-MAIN HORN?
n = current setting
The switch closes when the main horn sounds. This
could be when the auto horn is enabled and the
main clock reaches zero or when <HORN> is
pressed.