Filter
Top Products
40 Baseball Operations
3.2 Accessing Segment Timer
Turn on the console. Enter the multi-purpose sport code used for the scoreboard in use and
press <
ENTER>. A list of sport codes can be found in Appendix B.
The segment timer program is accessed through the main menu of each individual sport. The
DISPLAY MENU allows the user to start the segment timer. Press the <MENU> key and press
the down or up arrows until the following message is displayed:
Note: The segment timer function is disabled while the clock is running.
LCD Display Action
MENU-MAIN enter
display menu?
MENU- Display run
seg timer y/n
Exit game
Are you sure y/n
Press <YES> to enter the display menu.
Press <YES> to exit the sport code and run the
segment timer program.
The console will prompt the user to press <YES> a
second time to enter the segment timer to avoid
accidental exit from the sport program.
Refer to Section 3.1 for general segment timer
operation instructions.
3.3 Accessing 2-Digit or 6-Digit Display Segment Timer
This code is only used for the two-digit or six-digit displays designed exclusively for
segment timing. Enter code 100 after turning on the All Sport console to access the exclusive
segment timer program. For all other scoreboards, enter the correct scoreboard code and use
<MENU> to access the segment timer. Refer to Section 3.2.