Filter
Top Products
124 Football Options
8.4 Settings
The user can edit the following settings when EDIT SETTINGS has been selected from the
Main Menu.
Main Clock
Note 1: The settings entered for Main Clock are used with the
<SET MAIN CLOCK> key.
Note 2: The period, break, and overtime lengths are used differently depending on the
direction of the main clock. For count down, the main clock is set to the selected length,
decrements towards zero, and stops at zero. For count up, the main clock is set to zero,
increments towards the selected length, and stops when the selected length is reached.
LCD Display Action
MAIN CLOCK-MODE
TENTH SECOND? n
n = current setting
When the main clock is set to count down and tenths
of a second is selected, the main clock displays in
tenths of a second remaining when the time is below
one minute.
Press <YES> to set the main clock to display tenths
of a second.
Press <NO> to display whole seconds.
MAIN CLOCK-TIME
PERIOD mm:ss
mm:ss = current setting
Enter the correct amount of time per period in
minutes and seconds on the number pad and press
<ENTER>.
For example, 15:00 per quarter.
Note: Pressing <ENTER> to select the period time
as the main clock setting will increment the current
period number if the clock value was previously zero.
MAIN CLOCK-TIME
BREAK mm:ss
mm:ss = current setting
Set the amount of time between periods.
Enter the correct amount of time for break length in
minutes and seconds on the number pad and press
<ENTER>.
For example, 1:00.
(Continued on next page)