Filter
Top Products
98 Basketball Operations
Shot Clock
LCD Display Action
MAIN CLOCK-TIME
RESET mm:ss*
mm:ss = current setting
This setting is used for the <RESET> button on the
remote shot clock control console.
Note: The current setting for the <RESET> time
displays on the LCD until the first number key is
pressed.
Enter the correct amount of reset time in minutes
and seconds on the number pad and press
<ENTER>.
For example, 00:45
SHOT CLOCK-MODE
SYNC W/ MAIN?
Press <YES> to synchronize the shot clock with the
main clock.
If <STOP> for the main clock is pressed while the
main and shot clocks are running, the shot clock
stops. The shot clock restarts when <START> is
pressed for the main clock.
Press <NO> to allow the shot clock to run
independently of the main clock. The shot clock
starts and stops only with the switch on the remote
shot clock control console.
SHOT CLOCK-MODE
AUTO BLANK?
Press <YES> to blank the shot clock time when the
shot clock time is greater than or equal to the main
clock time. The shot clock is reset and stopped
when the display is blanked to eliminate inadvertent
sounding of shot clock horn.
Press <NO> to display the shot clock time at all
times.