Basic Operations 37
Shot Clock Control
The remote shot clock control box plugs into J7 on the back of the All Sport 5000 console. This
unit has a rocker switch for Start/Stop and a momentary button for reset. When the reset
button is pressed, the shot clock timer is changed to the reset value and stops the timer from
decrementing. The shot clock timer restarts when the reset button is released. In independent
mode, the Start/Stop switch starts and stops the shot clock timer when pushed, but does not
stop when the main clock is stopped. When in synchronized mode, the shot clock timer will
stop and start with the main clock switches only if it is running in the beginning.
2.8 General Multi-Purpose Timer Information
There is no insert for the Multi-Purpose Timer codes. Code 99 is used to operate the multi-
purpose timer.
Note: The Multi-Purpose Timer is a general timer used for 2, 4 and 6 digit time displays. The
timer will count up or down through hours, minutes, and seconds. The information will shift
on the 2 and 4 digit displays to show the most significant time values as the time changes.
The Multi-Purpose Timer code is also used as a Time-of-Day code by accessing the Time of
Day Menu through the Menu Key. The segment Timer may also be accessed through the
Menu Key.
Standard Keys
The keys that are used by the multi-purpose timer are <
START>, <STOP>, <SET MAIN
CLOCK
>, <COUNT UP/DOWN>, <AUTO HORN>, <MANUAL HORN> and <MENU>. The key
functions are explained in more detail in Section 2.6.
Accessing the Multi-Purpose Timer
Turn on the console, enter multi-purpose timer code and press <
ENTER>.
Press the <MENU> key and press the down or up arrows until the following message is
displayed:
LCD Display Action
MENU-MAIN
SELECT TOD?
Press <YES> to enter the Time of Day Menu.