Filter
Top Products
146 Hockey Options
Time Outs
Note 1: If a full or partial time out is not needed for the HOME or GUEST <TIME OUT>
keys, enter zero for the number of time outs.
Note 2: If a full or partial time out is not needed for <TIME OUT ON/OFF>, enter zero for
the time.
Note 3: The number for each type of time out must be manually entered for an overtime
period using the <EDIT> <TIME OUT> key sequence for each team (please refer to the
menu on the following page).
LCD Display Action
TIME OUTS-MODE
FULL n*
n = current setting
Enter the number of full time outs on the number pad
and press <ENTER>.
TIME OUTS-TIME
FULL mm:ss*
mm:ss = current setting
Enter the amount of time for a full time out in minutes
and seconds on the number pad and press
<ENTER>.
For example, 1:00.
TIME OUTS-MODE
WARNING mm:ss*
mm:ss = current setting
A warning horn can be configured to signal the end
of a full/partial time out. While the time out clock is
counting down, the horn will sound for one second
when the warning time is reached. Enter a zero for
the time to disable the warning horn.
Enter the time in minutes and seconds on the
number pad and press <ENTER>.
TIME OUTS-MODE
PARTIAL n*
n = current setting
Enter the number of partial time outs on the number
pad and press <ENTER>.
TIME OUTS-TIME
PARTIAL mm:ss*
mm:ss = current setting
Enter the amount of time for a partial time out in
minutes and seconds on the number pad and press
<ENTER>.
For example, 00:20
(Continued on next page)