Filter
Top Products
M9.3xi Low-Impact Treadmills Assembly Guide 1
Thank you for choosing Precor. For proper installation, please read this guide
thoroughly and follow the assembly instructions. If you do not assemble the
treadmill according to these guidelines, you could void the Precor Limited
Warranty.
Obtaining Service
You should not attempt to service the treadmill except for minor belt adjustments
and maintenance as described in the owner’s manual. If any items are missing,
contact your dealer. Should you need more information regarding Customer
Support numbers or a list of Precor authorized Service Centers, visit the Precor
website at www.precor.com.
Unpacking the Equipment
The treadmill is carefully tested and inspected before shipment. The unit is shipped
in one box. Ask for help from two or more people to unpack and assemble the
treadmill.
Required Tools
• ½-inch box end or crescent wrench
•String
• Tape
• Wire tie cutter
Installation Requirements
Follow these installation requirements when assembling the unit:
• Assemble the unit near the location where you plan to use it.
• Provide ample space around the unit.
Open space around the unit allows for easier access.
• Set up the unit on a solid, flat surface.
A smooth, flat surface under the unit helps keep it level. A level unit has fewer
malfunctions.
• Open the box and assemble the components in the sequence presented
in this guide.
• Insert all fasteners in the same direction.
For aesthetic purposes, insert all the fasteners in the same direction unless
specified (in text or illustrations) to do otherwise.
• Insert all fasteners with your fingers.
Use your fingers to properly align and thread the fasteners before wrench
tightening. This helps alleviate cross-threading. Do not fully wrench tighten
fasteners until instructed to do so.
Important: When wrench-tightened, the head of the fastener should be flush
with the product. If it is not, cross-threading has occurred. Do not attempt to
rework the assembly as more damage to the equipment will occur. Call
Customer Support. Refer to Obtaining Service.