Filter
Top Products
Owner’s Manual: Advanced Programming and Troubleshooting 54
Informational Displays
The treadmill provides information about its use (odometer
and hour meter), as well as software version, error codes,
and serial number. In general, you would only access this
information if directed to do so by Precor Customer Support.
These instructions guide you through all five informational
displays. Pressing the ENTER key moves you through the
displays. To exit, press and hold STOP at any time.
Important: Quick access to the informational displays is
available if error messages have appeared on the display
and have been recorded in the error log. This feature is
usually reserved for service personnel. At the Precor
banner, press and hold STOP for 4 seconds. Review the
information in Viewing the Odometer and continue with
step 2.
Viewing the Odometer
1. At the Precor banner, press the following keys in
sequence and without pause:
Numbers 6, 5 appear on the display as you press the
associated key.
Then ODOMETER appears on the display followed by
the odometer value (cumulative miles users have
traveled).
Note: If the unit of measure is set to metric, then
KILOMETERS appears instead of MILES.
2. When you are ready, press ENTER to move to the next
display (hour meter).
Treadmill Key Sequence
M9.35i STOP, 6, 5
M9.33i STOP, SPEED
▲, SPEED ▼
M9.3xi_Owners Manual.book Page 54 Wednesday, December 14, 2005 1:10 PM