Filter
Top Products
Owner’s Manual: Advanced Programming and Troubleshooting 56
Viewing the Error Log
ERROR LOG appears on the display followed by the
first entry in the error log if there are any errors. Up to ten
error codes can be retrieved.
If there are no errors in the log, you will see NO
ERRORS displayed.
7. To view any additional error codes in the error log, use
the arrow keys. Each error code specifies when it
occurred, listing the odometer and hour meter values.
Refer to Diagram 7.
Diagram 7: Error log
8. Copy the error code information to paper so you can
provide it to Customer Support if needed. Be sure to
copy it exactly as shown.
9. When you no longer need the information in the error log,
press QUICKSTART to erase the error log. While the
error log is displayed, maintain light pressure on the
QUICKSTART key. HOLD TO CLEAR ERRORS
appears. Continue to maintain pressure on the key.
Messages appear on the display to let you know when
the error log has been cleared.
Important: You cannot retrieve the error log once you
have cleared it. You may want to resolve any issues you
are experiencing with the treadmill before clearing the
error log.
10. When you are ready, press ENTER to move to the next
display (serial number).
SPEED
WATTS
DISTANCE
INCLINE
Heart Rate
Above
Below
Weight Loss
Cardiovascular
12000 MI 1714 HrS
1
The hour meter at the time
the error was detected.
Odometer reading at the
time the error occurred.
Error code
Most recent
error (Error
code index)
M9.3xi_Owners Manual.book Page 56 Wednesday, December 14, 2005 1:10 PM