Filter
Top Products
Owner’s Manual: Advanced Programming and Troubleshooting 53
Selecting Password Protection
Note: The password protection program is part of a two-
part sequence that starts with the steps found in Selecting a
U.S. Standard or Metric Display.
6. At the PASSWORD prompt, specify
PASSWORD ENABLED or PASSWORD DISABLED,
using the arrow keys to switch between settings.
CAUTION: Precor recommends that you leave the
password protection enabled. If you choose to change
the security of the treadmill, it is your responsibility to
make sure that no unauthorized personnel or children
are allowed on or near the treadmill.
7. Press ENTER to accept the displayed setting and return
to the Precor banner.
The change will be retained in memory even when the
treadmill is turned OFF and unplugged.
Setting Description
ENABLED Causes the password prompt to appear
prior to a workout and when returning from
pause mode.
DISABLED Lets you turn off the password prompt. Use
this setting with caution.
M9.3xi_Owners Manual.book Page 53 Wednesday, December 14, 2005 1:10 PM