3 - 34
INSP
ADJ
DRIVE CHAIN INSPECTION
5. Check:
● Drive chain stiffness a
Clean and oil the chain and hold as
illustrated.
Stiff → Replace the drive chain.
6. Install:
● Joint 1
● O-ring 2
● Drive chain 3
NOTE:
When installing the drive chain, apply the lith-
ium soap base grease on the joint and O-rings.
7. Install:
● Link plate 4
NOTE:
● Press the link plate onto the joint using a
chain riveter 5.
● Rivet the end of the joint using a chain riv-
eter.
● After riveting the joint, make sure its move-
ment is smooth.
New
New
8. Lubricate:
● Drive chain
Drive chain lubricant:
SAE 10W-30 motor oil or suit-
able chain lubricants