Filter
Top Products
5 - 38
CHAS
FRONT FORK
26. Tighten:
● Cap bolt (locknut) 1
NOTE:
● While compressing the fork spring, set the
thin type spanners 2 between the spacer 3
and spring guide 4.
● Hold the locknut 5 and tighten the cap bolt
with specified torque.
27. Install:
● Cap bolt 1
To outer tube.
NOTE:
Temporarily tighten the cap bolt.
T
R
.
.
29 Nm (2.9 m · kg, 21 ft · lb)
28. Install:
● Protector guide 1
Installation
1. Install:
● Front fork 1
NOTE:
● Temporarily tighten the pinch bolts (under
bracket).
● Do not tighten the pinch bolts (handle crown)
yet.
2. Tighten:
● Cap bolt 1
3. Adjust:
● Front fork top end a
Front fork top end (standard) a:
Zero mm (Zero in)
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)