Filter
Top Products
6 - 7
– +
ELEC
ELECTRIC STARTING SYSTEM
STARTING CIRCUIT CUT-OFF SYSTEM
OPERATION
If the main switch is set to “ON”, the starter
motor can only operate if at least one of the
following conditions is met:
● The transmission is in neutral (the neutral
switch is closed).
● The clutch lever is pulled to the handlebar
(the clutch switch is closed).
The starting circuit cut-off relay prevents the
starter motor from operating when neither of
these conditions has been met. In this
instance, the starting circuit cut-off relay is
open so current cannot reach the starter
motor. When at least one of the above condi-
tions has been met the starting circuit cut-off
relay is closed and the engine can be started
by pressing the start switch.
WHEN THE TRANSMISSION IS
IN NEUTRAL
WHEN THE CLUTCH LEVER IS
PULLED TO THE HANDLEBAR
1 Battery
2 Main fuse
3 Main switch
4 Starting circuit cut-off relay
5 Start switch
6 Diode
7 Clutch switch
8 Neutral switch
9 Starter relay
0 Starter motor
1
2
M
3
4
5
87
6
9
0
ELECTRIC STARTING SYSTEM