Filter
Top Products
5 - 31
CHAS
EC554200
Base valve
1. Inspect:
● Valve assembly 1
Wear/damage → Replace.
● O-ring 2
Damage → Replace.
EC554400
Fork spring
1. Measure:
● Fork spring free length a
Out of specification → Replace.
EC554502
Inner tube
1. Inspect:
● Inner tube surface a
Score marks → Repair or replace.
Use #1,000 grit wet sandpaper.
Damaged oil lock piece → Replace.
● Inner tube bends
Out of specification → Replace.
Use the dial gauge 1.
NOTE:
The bending value is shown by one half of the
dial gauge reading.
WARNING
Do not attempt to straighten a bent inner
tube as this may dangerously weaken the
tube.
EC554600
Outer tube
1. Inspect:
● Outer tube 1
Score marks/wear/damage → Replace.
Fork spring free length:
Standard Limit
460 mm (18.1 in) 455 mm (17.9 in)
Inner tube bending limit:
0.2 mm (0.008 in)
FRONT FORK