4 - 17
ENG
CARBURETOR
11. Install:
● Needle valve 1
● Float 2
● Float pin 3
NOTE:
● After installing the needle valve to the float,
install them to the carburetor.
● Check the float for smooth movement.
12. Install:
● Pilot screw 1
● Spring 2
● Washer 3
● O-ring 4
* Except for USA
Note the following installation points:
● Turn in the pilot screw until it is lightly
seated.
● Turn out the pilot screw by the number of
turns recorded before removing.
Pilot screw:
1-3/4 turns out (example)
*1-1/2 turns out (example)
13. Install:
● O-ring
● Leak jet 1
● Float chamber 2
● Screw (float chamber) 3
● Cable holder (throttle stop screw cable)
4
● Hose holder (carburetor breather hose)
5
5
3
2
4
5
1
14. Install:
● Diaphragm (air cut valve) 1
● Spring (air cut valve) 2
● O-ring 3
● Air cut valve cover 4
● Screw (air cut valve cover) 5
1
2
3
5
4