Filter
Top Products
5 - 22
CHAS
FRONT BRAKE AND REAR BRAKE
2. Install:
●
Brake lever
1
●
Bolt (brake lever)
2
●
Nut (brake lever)
3
NOTE:
Apply the lithium soap base grease on the
brake lever sliding surface, bolt and contacting
surface of the master cylinder piston.
Rear master cylinder
1. Install:
●
Copper washer
1
●
Brake hose
2
●
Union bolt
3
WARNING
Always use new copper washers.
ACHTUNG:
CAUTION:
Install the brake hose so that its pipe por-
tion
a
directs as shown and lightly
touches the projection
b
on the master
cylinder.
T
R
.
.
6 Nm (0.6 m · kg, 4.3 ft · lb)
T
R
.
.
6 Nm (0.6 m · kg, 4.3 ft · lb)
New
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
2. Install:
●
Master cylinder
1
● Bolt (master cylinder) 2
3. Install:
● Spring 1
● Brake pedal 2
● O-ring 3
● Bolt (brake pedal) 4
● Clip 5
NOTE:
● Apply the lithium soap base grease on the
bolt, O-ring and brake pedal bracket.
● Install the clip with its stopper portion a fac-
ing inward.
T
R
.
.
11 Nm (1.1 m · kg, 8.0 ft · lb)
New
T
R
.
.
26 Nm (2.6 m · kg, 19 ft · lb)