5 - 66
CHAS
REAR SHOCK ABSORBER
2. Tighten:
● Adjuster 1
3. Adjust:
● Spring length (installed) a
* For EUROPE, AUS, NZ and ZA
NOTE:
The length of the spring (installed) changes
1.5 mm (0.06 in) per turn of the adjuster.
ACHTUNG:
CAUTION:
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
4. Tighten:
● Locknut 1
Rear shock absorber
1. Install:
● Dust seal 1
● O-ring 2
● Collar 3
NOTE:
● Apply the molybdenum disulfide grease on
the bearing.
● Apply the lithium soap base grease on the
dust seals, O-rings and collars.
Spring length (installed) a:
Standard
length
Extent of
adjustment
246 mm (9.69 in)
* 246.5 mm (9.70 in)
240.5 ~ 258.5 mm
(9.47 ~ 10.18 in)
New