Filter
Top Products
5 - 42
CHAS
HANDLEBAR
EC5B5000
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
●
Handlebar
1
●
Handlebar holder
2
●
Bolt (handlebar holder)
3
NOTE:
●
The handlebar holder should be installed
with the punched mark
a
forward.
●
First tighten the bolts on the front side of the
handlebar holder, and then tighten the bolts
on the rear side.
2. Install:
●
Grip (left)
1
Apply the adhesive to the handlebar
2
.
NOTE:
●
Before applying the adhesive, wipe off
grease or oil on the handlebar surface
a
with a lacquer thinner.
●
Install the grip (left) to the handlebar so that
the line
b
between the two arrow marks
faces straight upward.
T
R
.
.
28 Nm (2.8 m · kg, 20 ft · lb)
3. Install:
●
Grip (right)
1
●
Collar
2
Apply the adhesive on the tube guide
3
.
NOTE:
●
Before applying the adhesive, wipe off
grease or oil on the tube guide surface
a
with a lacquer thinner.
●
Install the grip to the tube guide so that the
grip match mark
b
and tube guide slot
c
form the angle as shown.
R
L
90˚
3
1
b
c