Filter
Top Products
5 - 43
CHAS
HANDLEBAR
4. Install:
●
Cover (grip cap)
1
●
Throttle grip
2
NOTE:
Apply the lithium soap base grease on the
throttle grip sliding surface.
5. Install:
●
Throttle cables
1
To tube guide
2
.
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.
6. Install:
●
Throttle cable cap
1
●
Screw (throttle cable cap)
2
WARNING
After tightening the screws, check that the
throttle grip
3
moves smoothly. If it does
not, retighten the bolts for adjustment.
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
7. Install:
● Cover (grip cap) 1
● Cover (throttle cable cap) 2