Filter
Top Products
3 - 57
INSP
ADJ
REPLACING THE HEADLIGHT BULBS
3. Replace:
● Blown fuse
WARNING
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the starting and
ignition systems to malfunction and could
possibly cause a fire.
4. Install:
● Fuse cover
● Seat
Replacement steps:
● Set the main switch to “OFF”.
● Install a new fuse of the correct amperage.
● Set on the switches to verify if the electri-
cal circuit is operational.
● If the fuse immediately blows again, check
the electrical circuit.
Items
Amperage
rating
Q’ty
Main fuse 10 A 1
REPLACING THE HEADLIGHT BULBS
1. Remove:
● Headlight
Refer to “SEAT, FUEL TANK AND
SIDE COVERS” section in the CHAP-
TER 4.
2. Remove:
● Headlight bulb holder cover 1
3. Detach:
● Headlight bulb holder 1
4. Remove:
● Headlight bulb 2
WARNING
Since the headlight bulb gets extremely
hot, keep flammable products and your
hands away from the bulb unit it has cooled
down.