3 - 13
INSP
ADJ
CAUTION:
● Do not twist the element when squeezing
the element.
● Leaving too much of solvent in the ele-
ment may result in poor starting.
5. Inspect:
● Air filter element
Damage → Replace.
6. Apply:
● Foam-air-filter oil or equivalent oil to the
element.
NOTE:
● Squeeze out the excess oil. Element should
be wet but not dripping.
● Wipe off the oil left on the element surface
using a clean dry cloth. (Excess oil in the ele-
ment may adversely affect engine starting.)
7. Install:
● Filter guide 1
NOTE:
● Align the projection a on filter guide with the
hole b in air filter element.
● Apply the lithium soap base grease on the
matching surface c on air filter element.
8. Install:
● Air filter element 1
NOTE:
Align the projection a on filter guide with the
hole b in air filter case.
9. Hook:
● Binder 1
NOTE:
Hook the binder 1 so that it contacts the filter
guide projections a.
AIR FILTER CLEANING