Filter
Top Products
3 - 39
INSP
ADJ
REAR SHOCK ABSORBER INSPECTION
● STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
WARNING
Always adjust each front fork to the same
setting. Uneven adjustment can cause poor
handling and loss of stability.
3. Install:
● Rubber cap
Standard position:
13 clicks out
EC36K000
REAR SHOCK ABSORBER INSPECTION
1. Inspect:
● Swingarm smooth action
Abnormal noise/unsmooth action →
Grease the pivoting points or repair the
pivoting points.
Damage/oil leakage → Replace.