Filter
Top Products
5 - 19
CHAS
FRONT BRAKE AND REAR BRAKE
2. Install:
● Copper washer 1
● Union bolt 2
WARNING
Always use new copper washers.
ACHTUNG:
CAUTION:
Install the brake hose so that its pipe por-
tion a directs as shown and lightly
touches the projection b on the caliper.
New
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
3. Install:
● Brake hose holder 1
● Caliper 2
● Bolt (caliper) 3
NOTE:
Fit the brake hose holder cut a over the pro-
jection b on the front fork and clamp the brake
hose.
4. Tighten:
● Pad pin 4
5. Install:
● Pad pin plug 5
EC5A5100
Rear caliper
1. Install:
● Pad support 1
● Brake pad 2
● Pad pin 3
NOTE:
● Install the brake pads with their projections
a into the caliper recesses b.
● Temporarily tighten the pad pin at this point.
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R
.
.
18 Nm (1.8 m · kg, 13 ft · lb)
T
R
.
.
3 Nm (0.3 m · kg, 2.2 ft · lb)