Filter
Top Products
5 - 51
CHAS
STEERING
9. Install:
● Steering shaft cap 1
10. After tightening the nut, check the steer-
ing for smooth movement. If not, adjust
the steering by loosening the ring nut little
by little.
11. Adjust:
● Front fork top end a
Front fork top end (standard) a:
Zero mm (Zero in)
12. Tighten:
● Pinch bolt (handle crown) 1
● Pinch bolt (under bracket) 2
ACHTUNG:
CAUTION:
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
13. Install:
● Trip meter 1
● Bolt (trip meter) 2
NOTE:
Install the trip meter over the coupler bracket
3.
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R
.
.
20 Nm (2.0 m · kg, 14 ft · lb)
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)