Filter
Top Products
5 - 58
CHAS
SWINGARM
8. Install:
● Bolt (connecting rod) 1
● Plain washer 2
● Nut (connecting rod) 3
NOTE:
● Apply the molybdenum disulfide grease on
the bolt.
● Do not tighten the nut yet.
9. Install:
● Bolt (rear shock absorber-relay arm) 1
● Nut (rear shock absorber-relay arm) 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
T
R
.
.
53 Nm (5.3 m · kg, 38 ft · lb)
10. Tighten:
● Nut (connecting rod) 1
T
R
.
.
80 Nm (8.0 m · kg, 58 ft · lb)
11. Tighten:
● Nut (relay arm) 1
T
R
.
.
80 Nm (8.0 m · kg, 58 ft · lb)
12. Install:
● Cap 1
NOTE:
Install the cap (right) with its mark a facing
forward.