Filter
Top Products
5 - 29
CHAS
FRONT FORK
EC556000
HANDLING NOTE
NOTE:
The front fork requires careful attention. So it is
recommended that the front fork be main-
tained at the dealers.
ACHTUNG:
CAUTION:
To prevent an accidental explosion of air,
the following instructions should be
observed:
● The front fork with a built-in piston rod
has a very sophisticated internal con-
struction and is particularly sensitive to
foreign material.
Use enough care not to allow any foreign
material to come in when the oil is
replaced or when the front fork is disas-
sembled and reassembled.
● Before removing the cap bolts or front
forks, be sure to extract the air from the
air chamber completely.
EC553000
REMOVAL POINTS
EC553150
Cap bolt
1. Remove:
● Cap bolt 1
From the outer tube.
NOTE:
Before removing the front fork from the
machine, loosen the cap bolt.
2. Remove:
● Cap bolt 1
NOTE:
● While compressing the fork spring, set the
thin type spanners 2 between the spacer 3
and spring guide 4.
● Hold the locknut 5 and remove the cap bolt.