Filter
Top Products
5 - 20
CHAS
FRONT BRAKE AND REAR BRAKE
2. Install:
● Disc cover 1
● Bolt (disc cover) 2
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
3. Install:
● Caliper 1
● Rear wheel 2
Refer to “FRONT WHEEL AND REAR
WHEEL” section.
4. Tighten:
● Pad pin 3
5. Install:
● Pad pin plug 4
Master cylinder kit
1. Clean:
● Master cylinder
● Master cylinder kit
Clean them with brake fluid.
T
R
.
.
18 Nm (1.8 m · kg, 13 ft · lb)
T
R
.
.
3 Nm (0.3 m · kg, 2.2 ft · lb)
2. Install:
● Master cylinder cup (primary) 1
● Master cylinder cup (secondary) 2
To master cylinder piston 3.
NOTE:
Apply the brake fluid on the master cylinder
cup.
WARNING
After installing, cylinder cup should be
installed as shown direction. Wrong instal-
lation cause improper brake performance.
Å Front
ı Rear
Å
ı
Å
ı