Filter
Top Products
4 - 95
ENG
CRANKCASE AND CRANKSHAFT
EC4N5000
ASSEMBLY AND INSTALLATION
Crankshaft bearing
1. Install:
● Bearing
● Bearing stopper
● Bolt (bearing stopper)
● Screw (bearing stopper)
● Screw [bearing stopper (crankshaft)] 1
To crankcase (left and right).
NOTE:
● Install the bearing by pressing its outer race
parallel.
● To prevent the screw [bearing stopper
(crankshaft)] from becoming loose, crush the
screw head periphery a into the concave b
using a punch etc. In so doing, take care not
to damage the screwdriver receiving hole in
the screw head.
New
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
a
b
1
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
Crankshaft
1. Install:
● Crankshaft 1
Use the crankshaft installing tool 2, 3,
4 and 5.
Å For USA and CDN
ı Except for USA and CDN
Crankshaft installing pot 2:
YU-90050/90890-01274
Crankshaft installing bolt 3:
YU-90050/90890-01275
Adaptor (M12) 4:
YU-90063/90890-01278
Spacer (crankshaft installer) 5:
YM-91044/90890-04081
Å
ı