Filter
Top Products
3 - 43
INSP
ADJ
EC36d000
REAR SHOCK ABSORBER HIGH
COMPRESSION DAMPING FORCE
ADJUSTMENT
1. Adjust:
●
High compression damping force
By turning the adjuster
1
.
Stiffer
a
→
Increase the high compres-
sion damping force. (Turn
the adjuster
1
in.)
Softer
b
→
Decrease the high compres-
sion damping force. (Turn
the adjuster
1
out.)
Extent of adjustment:
Maximum Minimum
Fully turned in
position
2 turns out
(from maximum
position)
●
STANDARD POSITION:
This is the position which is back by the spe-
cific number of turns from the fully turned-in
position. (Which align the punch mark
a
on
the adjuster with the punch mark
b
on the
adjuster body.)
* For EUROPE, AUS, NZ and ZA
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
Standard position:
About 1-1/8 turns out
*About 1-1/3 turns out
REAR SHOCK ABSORBER HIGH COMPRESSION
DAMPING FORCE ADJUSTMENT