Filter
Top Products
5 - 56
CHAS
SWINGARM
2. Install:
● Bearing 1
● Oil seal 2
To relay arm.
NOTE:
● Apply the molybdenum disulfide grease on
the bearing when installing.
● Install the bearing by pressing it on the side
having the manufacture’s marks or numbers.
3. Install:
● Bearing 1
● Oil seal 2
To connecting rod.
NOTE:
● Apply the molybdenum disulfide grease on
the bearing when installing.
● Install the bearing by pressing it on the side
having the manufacture’s marks or numbers.
Installed depth of bearings a:
5 mm (0.20 in)
Installed depth of bearings a:
5 mm (0.20 in)
Swingarm
1. Install:
● Bush 1
● Thrust bearing 2
● Oil seal 3
● Collar 4
To swingarm 5.
NOTE:
Apply the molybdenum disulfide grease on the
bushes, thrust bearings and oil seal lips.
2. Install:
● Collar 1
To relay arm 2.
NOTE:
Apply the molybdenum disulfide grease on the
collars and oil seal lips.