Filter
Top Products
3 - 45
INSP
ADJ
STEERING HEAD INSPECTION AND ADJUSTMENT
2. Inspect:
●
Bearing free play
Exist play
→
Replace.
STEERING HEAD INSPECTION AND
ADJUSTMENT
1. Elevate the front wheel by placing a suit-
able stand under the engine.
2. Check:
●
Steering shaft
Grasp the bottom of the forks and gen-
tly rock the fork assembly back and
forth.
Free play
→
Adjust steering head.
3. Check:
●
Steering smooth action
Turn the handlebar lock to lock.
Unsmooth action
→
Adjust steering ring
nut.
4. Adjust:
●
Steering ring nut
Steering ring nut adjustment steps:
●
Remove the headlight.
●
Remove the handlebar and handle crown.
● Loosen the ring nut 1 using the ring nut
wrench 2.
Ring nut wrench:
YU-33975/90890-01403