Filter
Top Products
4 - 52
ENG
CLUTCH
EC4A5000
ASSEMBLY AND INSTALLATION
Push lever
1. Install:
● Push lever 1
● Bolt (push lever)
NOTE:
● Apply the lithium soap base grease on the oil
seal lip.
● Apply the engine oil on the push lever.
● Fit the seat plate 2 in the groove a of the
push lever and tighten the bolt (seat plate).
2
1
a
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
Clutch
1. Install:
● Primary driven gear 1
● Thrust washer 2
● Clutch boss 3
NOTE:
Apply the engine oil on the primary driven gear
inner circumference.
2. Install:
● Lock washer 1
● Nut (clutch boss) 2
NOTE:
Use the clutch holding tool 3 to hold the clutch
boss.
Å For USA and CDN
ı Except for USA and CDN
Clutch holding tool:
YM-91042/90890-04086
New
T
R
.
.
75 Nm (7.5 m · kg, 54 ft · lb)
Åı