4 - 75
ENG
KICK AXLE AND SHIFT SHAFT
3. Install:
● Spring guide 1
NOTE:
Slide the spring guide into the kick axle, make
sure the groove a in the spring guide fits on
the stopper of the torsion spring.
4. Install:
● Kick axle assembly 1
● Plain washer 2
NOTE:
● Apply the molybdenum disulfide grease on
the contacting surfaces of the kick axle stop-
per a and stopper plate 3.
● Apply the engine oil on the kick axle.
● Slide the kick axle assembly into the crank-
case and make sure the kick axle stopper fits
into the stopper plate.
5. Hook:
● Torsion spring 1
NOTE:
Turn the torsion spring clockwise and hook
into the proper hole a in the crankcase.
Kick idle gear
1. Install:
● Kick idle gear 1
● Plain washer 2
● Circlip 3
NOTE:
● Install the kick idle gear with its depressed
side a toward you.
● Apply the engine oil on the kick idle gear
inner circumference.
New