Tektronix TAS 465 Hunting Equipment User Manual


 
Removal and Installation Procedures
TAS 455 and TAS 465 Service Manual
6Ć11
TableĂ6Ć3:ăTools Required for Module Removal
Item No.
Name Description
1 Screwdriver handle Accepts TorxRĆdriver bits.
2 TĆ15 Torx tip TorxRĆdriver bit for TĆ15 size screw heads.
3 TĆ20 Torx tip TorxRĆdriver bit for TĆ20 size screw heads. Used only for removĆ
al of the cabinet handle.
4 Nut driver, 5/16 inch Used for removing the CRT earth ground cable.
5 AngleĆtip tweezers Used for knob and shaft removal.
6 FlatĆbladed spudger A nonĆmetallic probeĆlike tool with a flat bladed tip. Used to
remove the frontĆpanel trim and front module.
7 SlipĆJaw Pliers Used for removing the front feet from the cabinet.