Filter
Top Products
52
53
If you are not running, turn the speed settings off by pressing and holding
the down button. Repeat until -- appears. This will give you more memory
capacity.
If you want to record running information, turn the foot pod on
after your heart rate is displayed on the wrist unit. Press OK to start
recording your exercise.
Or
If you want to record running information without heart rate
measurement: after the heart rate reading 00 appears turn the foot
pod on.
The following displays start to alternate, if you have running speed and
altitude settings on, as you enter the Measuring mode.
The following displays start to alternate, if you have no speed or altitude
settings in use, as you enter the Measuring mode:
Exercise name Memory left Speed OFF Altitude OFF
Time of day
Current
heart rate
Recording rate
BasicUse (E0)/
Exercise set in use
(E1-E5)
No speed settings in use
Exercise name Memory left Speed type Altitude
Time of day
Current
heart rate
Recording rate
BasicUse (E0)/
Exercise set in use
(E1-E5)
Running speed
in use
If you are running or cycling, turn the speed settings on by pressing and
holding the down button. Repeat until the right speed setting is displayed
in the right-hand corner of the display.
-- = speed settings off
ru = running speed
b1 = bike 1
b2 = bike 2
Make sure that you have the right speed settings turned on before
starting the recording.