Filter
Top Products
44
45
Options
Monitor Set
Sound On/OFF Units 1/2 Help On/OFF
Monitor settings
1. In the Time of day display
scroll up or down until
OPTIONS is displayed.
2. Press OK to enter the
Options mode. EXERCISE
SET is displayed.
3. Scroll up or down until MONITOR SET is displayed.
4. Press OK to start the monitor settings. Sound is displayed.
Turning activity/button sound on/off
If you start from the Time of day display, repeat steps 1-4.
5. Press OK to start setting the sound. On/OFF starts to flash.
6. Scroll up or down to set sound On or Off. Press OK.
Activity/button sound consists of the button sound and in the Measuring
and Recording modes the following activity sounds: start, stop and lap
recording, phase start, interval phase end and recovery calculation end
sounds. It does not consist of target zone alarms, watch alarm or fitness
test alarm.
Selecting measuring units
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Units is displayed.
6. Press OK to start setting the units. 1 or 2 starts to flash.
7. Scroll up or down the unit which best suits you. Press OK.
Naming bike 1 and bike 2
You can name the bikes with four letters, numbers or marks.
The number in the right corner indicates, which bike settings are in use.
(-- =Speed OFF, b1=Bike 1, b2=Bike 2)
1. In the Time of day display scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Scroll up or down until SPEED SET is displayed. Press OK.
4. Scroll up or down until Bike 1 or 2 is displayed.
5. Press and hold signal/light button. Adjustable letter is flashing.
6. Scroll up or down to select the desired mark. Press OK.
7. Repeat previous step until you have chosen all four letters.
To continue your settings, press the stop button or to return to the Time of
day display, press and hold the stop button.