Polar COACH Heart Rate Monitor User Manual


 
57
SENDING INSTRUCTIONS
1. Pack the product carefully to avoid damage.
2. Include all parts of the Polar Heart Rate Monitor. A full periodic check
will be done on the whole product.
3. Include proof of purchase (a receipt or its photocopy) if the product is
under warranty.
4. Include a detailed description of the problem. Use the return sheet of
the Customer Service Card.
5. Include your name, return address, and daytime telephone number.
6. Ship postage prepaid to your dealer or distributor. For contact details,
see the Customer Service Card.
POLAR SERVICE PROCEDURE
It is recommended that any service be carried out by an authorised Polar
service personnel. Our standard test and check procedures will be performed
on all Polar Heart Rate Monitors. The tests include the following elements:
POLAR CODED TRANSMITTER
1. Visual inspection
2. Check of the transmission range
3. Check of electrode conductivity
4. Wash and clean if necessary
POLAR WRIST RECEIVER
1. Visual inspection
2. Check of battery voltage
3. Check and cleaning of case contacts
4. Re-assembly, including seal renewal if necessary
5. Water resistance test
6. Operational test
Water resistance cannot be guaranteed after unauthorised service.
PC COACH LIGHT™ SOFTWARE SUPPORT
See PC Coach Light™ software manual or contact your local distributor of
PC Coach Light™ software or Biometrics Inc., 637 S Broadway,
Suite B-156, Boulder, CO 80303, USA
Phone: +1 (303) 442-1818, Fax: +1 (303) 494-9722,
www.pccoach.com
Contact information is found also under the help menu of the PC Coach
Light™ software.