Filter
Top Products
16 VIX IM MICROSTEPPER INDEXER DRIVE USER GUIDE
PL1100 Power Supply
General Description
The PL1100 is a linear power supply with a rated output of 1120W (80V/14A) for use with
ViX and XL series drives. The supply requires a suitably rated transformer supplying 50V
AC RMS for the HV and 20V AC RMS for the +24V DC. The use of the PL1100 offers the
following benefits:
• Provides 80V HV and +24V DC output
• Single or three phase operation
• Built-in power dump switch
• Integral fusing
Figure 3-4 shows the PL1100 output wiring for two ViX drives. This illustrates how to route
the main HV supply separately to each drive. The lower current requirements of the +24V
logic/brake supply can allow the wiring to be linked between drives.
For full installation instructions see the PL1100 Power Supply leaflet 1600.323.XX.
X2
X3
X1
X4
X5
ST
HV FB
10
1
10 mm MIN
X2
X3
X1
X4
X5
ST
HV FB
10
1
Power Supply
55V
AC IN
1/3 PH.
X2
L1
L2
L3
LINK
FOR
SINGLE
PHASE
20V AC IN
20V AC IN
+24V DC OUT
Risk of electric shock.
High voltage remains on terminals
after power is removed.
Allow 5 minutes for capacitors
to discharge.
EXT. BRAKING RES.
MOTOR 0V.
X1
MOTOR HV OUT
HV
REGEN
+24V
PE
0V
CAUTION
PL1100
Figure 3-4. PL1100 Power Supply and Drive Connections