Filter
Top Products
Side Bed Cover Replacement
4. Starting at the raised corner of the flange, lift upwards and outwards to free its outer
edge from the frame along its length.
5. Lifting the outer edge of the cover, push the cover towards the center of the treadmill to
clear the cover’s inner flange from the frame and remove from the treadmill.
Installing Replacement Side Bed Cover
To replace the cover, proceed as follows:
1. To be sure that you have the correct cover (right or left), position it so that the wider
flange is at the outside edge of the frame. The hole in the cover should be located
nearer the front end of the treadmill.
2. Position the new cover so that the hole is nearest the front of the treadmill. If it is a left-
hand cover, be sure to position the front end first, fitting the inner flange to clear the
running belt pulley.
3. Move the cover parallel to the frame and hook the inner flange over the frame.
5.11