Filter
Top Products
Definition:
"ELEVATION
STALL BEYOND 0% or 15%
RANGE"
Possible Cause:
Out of range
elevation count or elevation system
malfunctioned.
Note 1:
Press and hold
the "0", "2" & "START"
keys down at the same
time, then release the "1"
key. The display will
read: MAINTENANCE.
Press and release the
"8" key.
Or manually hold the "8"
key and simultaneously
turn the treadmill on by
the on & off switch.
Both methods will
engage "Test Mode".
Engage
"TEST MODE"
Verify elevation
response in "Test
Mode".
See (note 1)
Start
Does
treadmill elevate
in TEST MODE
?
1A
Code: EL STL Flowchart
Lift motor shroud.
Verify elevation "UP" &
"DOWN" LED's toggle
when elevation keys are
being pressed.
See diagram #1
YES
Do
elevation LED's
toggle
?
Diagram #1
Stop
Check fuses 1 & 2 on
the M.C.B.
See (note 2)
Note 3:
Visually check
both fuses. Replace
fuses, if burned or
cracked. If a multi-meter
is available, verify
continuity.
YES
Fuses
good
?
NO
Replace fuses.
Stop
YES
Note 2:
Engage
MAINTENANCE mode scroll
up through the menu to the
different error references
by using the "UP" elevation
key. Clear all error codes
by pressing the "HEART"
key.
Verify elevation screws
are being lubricated and
no foriegn obsructions
are binding the
elevation system.
NO
NO
Replace Display
Cable.
Stop
Clear display
code.
4.46