Static Shock
**CAUTION**
When checking motor
brushes, always turn
the treadmill off and
unplug.
The treadmill may cause a slight shock from the display panel or handrails, due to
a faulty ground wire or a worn running belt and deck.
Symptom:
Slight shock from handrails or when using the display panel.
1. Check the line cord and plug prongs for signs of damage.
• Verify no prongs are broken, loose or missing.
2. Check the green ground wires attached to the frame for the following:
• Motor
• Line cord
3. Check running belt condition.
• Check for glazing. Replace the running belt if glazed.
• Wax slick deck.
4. Check drive motor conditions
• Verify motor brush wear.
4.32