Filter
Top Products
Speed Troubleshooting
Note: This sym-
ptom may be
easily fixed by
verifying certain
values in the
Configure Mode.
Note: For each
value changed
the “ENTER” key
must be pressed
to be saved.
.
Symptom:
Treadmill appears/feels faster/slower than other STAR TRAC
treadmills.
1. Engage Maintenance Mode by holding down the “0”, “2” and “Start” keys at the
same time, and then release the “1” key only. Display will read MAINTENANCE
momentarily then display UNITS.
2. Using the elevation “ ↑ “ key to go through the parameteres, verify the
following parameterts have the correct values.
110V / 220V Units English 220v Units Metric
• UNITS ENGLISH METRIC
• MN SPD 0.5 1.0
• MX SPD 10.0 20.0
• ENTRY UNITS/TENTHS UNITS/TENTHS
• 10 REV 30.7 35.8
• CNT/REV 31 31
3. If any values have been changed or set back to default settings, re-engage
Auto-Calibration and re-calibrate.
4.13