Oregon Scientific SE188 Heart Rate Monitor User Manual


 
5
EN
Light Mode ON or OFF - see “Activating the Backlight”
section.
Tap On Lens ON or OFF- see “Tap On Lens” section.
To set these features:
1. Press MODE to navigate to the Real-Time Clock
Mode.
2. Press SET repeatedly until you reach the feature you
wish to change.
3. Press ST / SP / + or MEM / LAP / - to change the
setting.
4. Press SET to confirm the setting and move on to the
next one.
ACTIVATING THE BACKLIGHT
When the Light Mode is set to OFF:
Press to turn on the backlight for 3 seconds. Press any
other key whilst the light is on and it will extend the light
time by another 3 seconds.
When the Light Mode is set to ON:
Press any key to turn ON or extend the backlight for 3
seconds.
To help conserve power the Light Mode ON setting will
automatically switch to OFF after 2 hours.
NOTE The backlight does not work when the low battery
icon is shown and will return to normal once the batteries
are replaced.
ACTIVATING THE KEYPAD LOCK
To turn the keypad lock ON or OFF: