Filter
Top Products
75
* The USB cable and ferrite core are enclosed with the communication unit.
* Connect the communication unit directly to the personal computer with the USB cable.
Operation is not guaranteed if the communication unit is connected through a USB hub.
* USB communication may rarely result in a communication error due to problems with
compatibility when the USB controller is of the Open Host Controller Interface (OHCI) type. In
the case a problem with compatibility has occurred, either use a Universal Host Controller
Interface (UHCI) type of USB controller, or use infrared communication.
(2) Attach the watch to the communication unit.
(3) The watch will enter the communication mode (USB
communication state) if the watch body is properly
connected to the communication unit.
B. Sending and Receiving Data
The operations for sending and receiving data are performed with the software provided
using a personal computer (AQUALAND GRAPH Nx or CAPgm). Refer to the
AQUALAND GRAPH Nx or CAPgm manual contained on the CD-ROM provided for
further details.
4. Data Communication Between Watches
If your friend or acquaintance has a CYBER AQUALAND Nx (Movement No. D71*) or
CYBER AQUALAND (Movement No. D70*), data can be transferred between watches by
using the infrared communication function. Data that can be transferred between watches
is indicated below.
• Time settings (time, date, time difference from UTC, daylight savings time)
• Alarm settings (set time)
• Dive alarm (depth alarm, dive time alarm) settings
• Anniversary data (graphic)
Following data transfer, the watch settings of the receiving watch change according to the
watch settings of the sending watch.
* Time and alarm settings can also be transferred between other watches equipped with an infrared
communication function that complies with IrWW standards.
USB Communication Display
(Transfer Standby Display)