Filter
Top Products
73
* Pressing the lower right button (A) once when any menu is displayed returns the display to the
previous menu.
* The watch returns to the time mode of the standard mode when the lower right button (A) is
pressed once during the initial infrared communication display.
* The watch can be immediately returned to the time mode of the standard mode by pressing the
lower left button (D) for at least 2 seconds and then releasing when any menu is displayed.
* The display automatically returns to the previous menu when none of the buttons are pressed
for about 1 minute during the display of any menu (or for about 3 minutes during time data
transmission display).
* The watch automatically returns to the time mode of the standard mode when none of the
buttons are pressed for about 1 minute during the initial infrared communication display.
2. Communication by USB Interface
The communication unit is used during data communication by USB interface.
* Please purchase the separately sold communication unit when you want to use a USB
interface for communications between the watch and PC.
* When performing data communications with your PC using the communication unit, it is
necessary to install a USB driver in the PC being used in advance.
* Refer to “Communication Unit” in this manual for more details on the communication unit
and driver installation procedure.
3. Data Communication with PC
There are two ways for transferring data between the watch and a personal computer.
The first involves using the infrared communication function, and the second involves
using the communication unit (sold separately). Data can be edited on the PC using the
software provided (contained on the accessory CD-ROM) after transferring data to the PC.
The following indicates data that can be transferred to the PC.
a. Diving Log and Profile Data
/Diving data that has been transferred to the PC can be edited and managed using the
AQUALAND GRAPH Nx software provided. For further details, refer to the section on
"Accessory Software" in this manual and the "AQUALAND GRAPH Nx" manual contained in the
accessory CD-ROM.
b. Watch Settings
/Watch settings that can be transferred to the PC include location information (name and time
difference from UTC), alarm, timer, travel time, daily graphic and dive alarm settings. Setting
data incorporated using the "CAPgm" software provided can be edited on the PC, and edited
settings can be sent back to the watch. For further details, refer to the section on
"Accessory Software" of this manual and the "CAPgm" manual contained in the accessory CD-
ROM.
* The accessory software contained in the accessory CD-ROM must be installed prior to
transferring data between the watch and PC.
* Perform infrared communication and communication using the USB interface within a
temperature range of +10°C to +35°C (50°F to 95°F). Data may not be able to be transferred if
outside this range.