Filter
Top Products
39
(3) The flashing item can be corrected by pressing either the upper right button (B) or
lower right button (A).
• Pressing the upper right button (B) once advances the display by one step at a time each time it
is pressed, while pressing the lower right button (A) once moves the display back by one step
at a time each time it is pressed. (Pressing either button continuously causes the display to
change rapidly.)
• When the upper right button (B) is pressed once while in the alarm number selection state (an
alarm number is flashing), the next alarm number is called up each time it is pressed. When
the lower right button (A) is pressed once in the alarm number selection state, the next alarm
number is called up in the reverse order each time it is pressed. Select "Silent" when you do
not want the alarm to sound. In this case, the alarm time is notified only with "Alarm" on the
display.
• You can monitor the alarm corresponding to the flashing alarm number by pressing the upper
right button (B) or lower right button (A) in the alarm number selection state for as long as the
button is pressed. (The next or previous alarm number is momentarily displayed the instant the
button is pressed, while pressing either button continuously causes the set alarm to sound.)
(4) Press and release the lower left button (D) to finalize the alarm setting.
* The 12 hour or 24 hour format setting is in accordance with the setting in the time mode.
* The watch automatically returns to the normal alarm display when none of the buttons are
pressed for about 3 minutes in the correction state (display flashing).
* The watch can be immediately returned to the normal alarm display by pressing the lower left
button (D) and then releasing in the correction state (display flashing).
* The watch automatically returns to the time mode when none of the buttons are pressed for
about 3 minutes during the normal alarm display.