Filter
Top Products
6. Using the Timer Mode
The timer of this watch can be set up to 99 minutes in 1 minute units. An alarm sound
indicating that the time is up sounds for about 30 seconds and "Timer" is displayed on the
display when the time on the timer is up. The timer then returns to the initial set time and
stops.
In addition, the alarm sound indicating that time is up following completion of timing can be
selected from 15 types of alarm sounds.
A. Setting the Timer
(1) The minutes flash when the upper left button (C) is pressed for
at least 2 seconds and then released in the timer mode.
(2) Set the minutes by pressing the upper right button (B) or lower
right button (A).
• Pressing the upper right button (B) advances the display by one
minute at a time each time it is pressed while pressing the lower right
button (A) moves back the display by one minute at a time each time it is pressed. (Pressing
either button continuously causes the display to change rapidly.)
(3) The time up alarm number flashes each time the upper left button (C) is pressed.
(4) Set the time up alarm number by pressing the upper right button (B) or lower right
button (A).
• Pressing the upper right button (B) once calls up the next time up alarm number each time it is
pressed, while pressing the lower right button (A) once calls up the next time up alarm number
in the reverse order each time it is pressed. Select "Silent" when you do not want the time up
alarm to sound.
• You can monitor the time up alarm of the number that is flashing by pressing the upper right
button (B) or lower right button (A) for as long as the button is pressed. (The next or previous
time up alarm number is momentarily displayed the instant the button is pressed, while
pressing either button continuously causes the set time up alarm to sound.)
(5) Press and release the lower left button (D) to return the watch to the timer setting
display.
* The watch automatically returns to the timer setting display when none of the buttons are
pressed for about 3 minutes in the correction state (display flashing).
* The watch can be immediately returned to the timer setting display by pressing the lower left
button (D) and then releasing in the correction state (display flashing).
41
Flashing
(C)
(D)
(B)
(A)
[Timer Setting Display]
Current time
Minutes,
seconds